Quote:
Originally Posted by steve25
I do, and I also open up the Vee groove that passes the oil from the block oil passage into the hole that feeds the bearings.
The area of that Vee groove formed by the factory drilling process is less then the oil passage hole.
|
Do you have a picture of this?
__________________
 Johnny US Army Retired
1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph
1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car.
1980 Formula 350 Pontiac back burner project
1972 LeMans 350 Pontiac
|