Didn't read every post, but I'll say that when breaking in a cam be SURE to NOT use detergent oil. Use break-in oil ONLY. Not racing oil. Not diesel oil. Break in oil. We used to simply use non-detergent 30 weight that was the cheapest. Probably not available today.
Detergents in pretty much ALL oils except break-in oil will remove the lube from the cam and lifters quickly and render them useless for the cam break-in. And, NOT changing the oil after the cam break-in is false economy. My method is a 20-30 minute cam break in, dump the oil and filter, fill with normal fill, run about 500 miles, dump oil and filter again, and good to go. I've been using Rotella diesel spec in all my flat tappet engines for the past 23 years with no issues. The '65 has about 55,000 miles on the cam and lifters and the '67 has about 90,000 miles on the cam and lifters. No issues. Both broken in with non-detergent oil. But to be fair, in the '80's when parts quality was decent.
__________________
Jeff 
|