8.2 BOP Axle, has anyone broke one?
I am interested in hearing your experiences with the 8.2 BOP axle. Has anyone broke one, if so what let go? Also what's the best 1/4 mile time/60 foot that you have done with a stock 8.2? I'll start it off with my experience with the 8.2. About 10 years ago I broke teeth on the ring and pinion (3.55 factory gears). At the time the car was running high 12's. Best et and 60 foot with stock axle are in my signature. I am considering putting in Yukon axles and the TA1808 rear cover girdle with cap load bolts but not sure it's worth it.
__________________
1972 GTO
468 2 Bolt Main w/Eagle rotating assy
SD Ported 295 KRE D Ports 10.8 CR
OF Hydraulic roller w/ 1.65 stainless rockers
Performer RPM Intake
Holley 3310 780 Vacuum Secondary
TH400 with 10" Continental Convertor
8.2 BOP 4 pinion 10 Bolt with 3.36 gears
11.428/118.95/1.618
|