Thread
:
79 Y84 Trans Am Project
View Single Post
#
10
12-19-2023, 07:55 PM
Gator67
Ultimate Warrior
Join Date: Jul 2009
Location: North Scottsdale
Posts: 1,656
We had the subframe powder coated. When it came back we installed solid full height subframe bushings from Speedtech, and Ridetech's full coilover front suspension.
We started to install the Ridetech 4-link coilover suspension. But after seeing what this involved, we decided to run the fuel and brake lines first. We had custom sized hard lines made which we flared and installed tube nuts (3/8 fuel, 3/8 return, 3/16 brake).
Went with a 9", Richmond 3rd member, 3.25 gears, Powertrax Grip Pro differential. Had the differential housing made with Torino ends, and factory width so that we could run rear wheels without a deep dish.
Attached Thumbnails
__________________
"If the best Mustang is the Camaro, the best Camaro is actually the Firebird"
David Zenlea
Reply With Quote
Gator67
View Public Profile
Send a private message to Gator67
Find all posts by Gator67