I used a deatschwerks compression to AN on the factory feed line to flex EFI rubber line to TB. https://www.summitracing.com/parts/DWK-6-02-0109 Actually feels a little heavier than most aluminum ANs.
Pump was indeed 10mx1.0. fittings came with a crush washer. installer had used Teflon tape on threads on the EZ fittings. They also had the sharp 'barb' on them,unlike the earls i used.. https://www.summitracing.com/parts/EAR-759166ERL
https://www.summitracing.com/parts/ICB-F06ANM1010
__________________
Skip Fix
1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever!
1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand
1965 GTO 4 barrel 3 speed project
2004 GTO Pulse Red stock motor computer tune 13.43@103.4
1964 Impala SS 409/470ci 600 HP stroker project
1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs
|