Measured the rise of the fuel line where it kicks up in the frame area/ starting of the rearend crossmember on one of my projects, a '71. The rise is near 10 inches. In order to get the front of the fuel line through the frame, the body is going to have to come up at least a foot. That's with the gas tank out, & you will have fun twisting/wrangling the back of the new fuel line without kinking it. With the fenders off, no engine or transmission installed, I have used the same process many times, which takes about 3 hours to get the body up that high.
__________________
Buzzards gotta eat... same as worms.
|