Thread: Coolant in oil
View Single Post
  #4  
Old 12-10-2023, 07:01 AM
steve25's Avatar
steve25 steve25 is offline
Ultimate Warrior
 
Join Date: May 2008
Location: Westchester NY
Posts: 14,865
Default

Do what Tom has posted but use only distilled water, no antifreeze.
Doing this will better allow the water that’s getting into the motor to boil off once the oil temp comes up, and water will do less harm then antifreeze.

I find that using the powered type sealer ( like the Gunk brand ) works faster (you do not have to wait for them to disolve) and it powder works just as well because it’s the same stuff as the GM pellet disc.

Also once you get the powder in run the car at idle with the cap off, then once you see that the thermostat has opened some. Slap the cap on and then take the car for a drive.

__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!

1) 1940s 100% silver 4 cup tea server set.

Two dry rotted 14 x 10 Micky Thompson slicks.

1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.

Education is what your left with once you forget things!