The outlet line to the trans cooler does that come straight from the pump? And what is the psi range there?
I tested my feed line to the cooler this pass summer and I was around 60 psi hot as I can remember. From what I understand, high pressure on this line is a no no. In Cliff's book page 94 talks about reducing the size of the converter feed hole in the pump on performance builds. I think I drilled mine out to .125
Here is a good read. https://www.sonnax.com/tech_resource...-lube-circuits
__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
|