Thread: Upper control arm removal
View Single Post
  #5  
Old 06-28-2023, 10:09 PM
GtoFM's Avatar
GtoFM GtoFM is offline
Senior Member
  
Join Date: Apr 2018
Location: NW Ohio
Posts: 180
Default
Do you have a floor jack under the lower control arm taking pressure off the spring? If so, lower it until you have a gap. The spring tension is your friend here. Have you tried a BHF with another BFH as a backup on the spindle flat spots?

Reply With QuoteReply With Quote
The Following User Says Thank You to GtoFM For This Useful Post: