Ok, no oil up top, but are you getting oil out of the lifter bore feed holes?
Remember the distributor spins counter clockwise.
But away I agree with Tom.
Just drill, tap and hex pipe plug the oil feed hole in each deck, then run the 65 and up rockers.
This set up oils things better and more evenly up top anyway.
I think even a small cup plug can be driven in each hole instead of drilling and taping, but I long ago forgot the size needed.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
Last edited by steve25; 05-30-2023 at 12:01 PM.
|