Quote:
Originally Posted by pontiacmark
I have a brand new GM balancer and Eagle crank and the fit is way too tight. Would you recommend polishing out the ID of the balancer?
|
Eagle seems to make their crank snouts a bit larger than OEM. I tried to install a Romac balancer on an Eagle, and that would NOT work. I had a Power Bond balancer on hand, though, it was snug but fit the Eagle much better.
__________________
'73 T/A (clone). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 315rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'.
'67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust
|