Quote:
Originally Posted by Scott65
You probably shouldn't trim that fitting. I believe it has a barb at the end (and only at the end) to aid retention.
|
IIRC, the barbed fitting on the plate(top) is brass with multiple steps
__________________
Will Rivera
'69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears
‘66 Lemans, 455, KRE D-Ports, TH350, 12 bolt 3.90 gears
'64 LeMans 400/461, #16 Heads, HR 230/236, TKO600, 9inch Rear, 3.89 gears (Traded)
'69 LeMans Vert, 350, #47 heads: Non-running project
|