Lockout id
Thanks to all that took time to post a message
To a small trivial item like this…
So
Here are a few more angles of my linkage,
My upper rod seems real straight less a soft bend
3.5” up from the adjuster some I have seen like the picture of my buddies has a bigger kink ,,,
My swivel is nearly flat looking down from the top long arm has a 1/4" offset to the frame side
I have seen a few with a good/bigger offset bend near the end for the linkage rods
Also looking from the side my swivel arms make a Y shape
Many I looked at have them at a 90 degree orientation making the rod holes farther apart
20” center to center. On long my long rod to the trans ... seems a saginaw would be shorter and 3 speed also
12.5 end to center on vertical column rod
What are yours??? When you have time
Scott
Last edited by Scott Thelander; 03-06-2022 at 04:04 PM.
Reason: I hate sideways pictures straight on my phone but downloaded the spin .... whatever
|