[Steve C.]

"I assume I would not see any advantage with that cam"

I think most here would agree.

For interest, somewhat related since it's a similar cam:
http://www.sdperformance.com/newsStory.php?newsID=44

And the pistons...

"Would they need to be different if a person was using what comes in a “generic” stroker kit?"

I doubt it. But someone else can comment from experience, I use custom pistons.

And a fwiw, that Speedmaster single plane is in fact based off a worked over Holley Street Dominator intake. With proper port work and runner blending It can easily support 600 hp if desired.
Based on my experience with the Tomahawk intake ( same ), if ported it can can go as tall as a 2.300" port and leave about 0.125" above for gasket seal.


.