Quote:
Originally Posted by tooski
In a 10.1 cr 400, KRE, HS 1.65's. This is the 'cam card' I got when I bought it in the middle 80's. I went with the recommended lifters and springs. I'm fairly certain the lifters are not Rhoads or bleed downs. 10.5 - 11" vac at 750 rpm. I'm finding it just a bit difficult to keep my foot out of it. I do have a vid of it idling, if you like.
|
Based on the one page I have from a catalog that is shown as the TC-02 / 744HL
Stan
__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm