Yes, now installed but car is not on the road yet. I don't have my paperwork in front of me but believe the Addco number is K2-419-00-726 which is a 1" rear bar. They also list a little different number for hardtops and sedans with the last three numbers being 725, but the specs are the same. The bar was 1" too narrow and 1/2" plates welded to each arm had the bar back and centered under the axle tubes. While I've simply used 1/2" black pipe as spacers inside the arms on other installs, this time I cut some 1x2 bar stock and tacked them in place.
__________________
Mick Batson
1967 original owner Tyro Blue/black top 4-speed HO GTO with all the original parts stored safely away -- 1965 2+2 survivor AC auto -- 1965 Catalina Safari Wagon.
|