Started out thinking of a 500hp target and going with some aluminum heads at 72cc's. After pulling one of the heads off and finding a dished piston, just going to stick with the irons and go with it at about 9.7CR. Seeing enough dyno sheets that have been posted, I decided that a big flat torque curve is more what I am really looking for vs a peak HP#. Got a set of Comp aluminum 1.6's that I was running on top of the #13's I had on my 400 when running the Summit 2802. Got pretty much what I need, but always over think it and second guess things a lot. Just have to pick a cam and go with it.
__________________
 "NSDQ"
|