Quote:
Originally Posted by Scott Stoneburg
For reference, this is how i did mine, using the same pick up tube to start with, thank you Dragncar for the part number on the tube. I brazed the pick up screen back to the tubing instead of trying to weld it because of my skill set..lol...
|
I thought about that but did not think I could get the cone part separated from the tube without damaging the screen.
That tab on the pickup in stock form where it bots to the pump, I could not get it off with heat. I had to cut it in half.
But actually what you did was simpler and you do not have to deal with the 90s. One long smooth tube.