I didn't get around to adjusting toe yet. I have been play with caster and camber. Doing it the old fashion way. I hardly had any caster to start with. It was close to 0. So far I got it to +2 and that is about the most I can get with the stock components. I have the camber 0 at ride height and -0.4 with front end lifted 2". I have -2.0 with suspension toped out. I think this is good enough and can start with the toe. Let me know what you think.
I will probably run it to an alignment shop the verify my setup before I go down the track.
|