11-20-2020, 11:47 PM
|
|
Ultimate Warrior
|
|
Join Date: Jan 2012
Posts: 10,947
|
|
Quote:
Originally Posted by flat-bill
I use just a touch of antiseize between the back side of the flare and the flare nut. This will allow the nut to tighten smoothly without galling. Some times it is necessary to tighten and loosen the flare nut several times to get the flare to seat down properly on the inverted fitting. Billk
|
.....
__________________
2019 Pontiac Heaven class winner
https://youtu.be/XqEydRRRwqE
|