it will interesting to see what the measurements are. Here is one I got off a different vendor back in December and sent it back because it was damaged and it was the only one they had. Ames didn't have any at the time I think. People were complaining that when the collar was installed there was a big gap between the collar and the steering column. I never tried to install the damaged one but I did run a straight edge over the one end ,,you can see there is a slight gap where the part that will touch the column sits lower. I wonder if these new ones will be the same or with a bigger gap. The bigger the air gap will make the gap tighter between the collar and the column.
__________________
72 lemans,455 e-head, UD 255/263 solid flat,3.73 gears,,,10" 4400 converter,, 6.68 at 101.8 mph,,1.44 60 ft.2007
(cam 271/278 roller)9"CC.4.11gear 6.41 at 106.32 mph 1.42 60 ft.(2009) SOLD,SOLD
1970 GTO 455 4 speed #matching,, 3.31 posi.Stock manifolds. # 64 heads.A factory mint tuquoise ,69' judge stripe car. 8.64 @ 87.3 mph on slippery street tires.Bad 2.25 60ft.Owned since 86'
|