Camshaft lift irregularities
I figured something was up when I couldn't properly adjust the hydraulic lifters on my 1966 LeMans 326 factory HO. I just checked the lobe lift and one is .041 less than the others. Looks like I'll be getting a new cam and lifters. The engine was rebuilt about 1500 miles ago, not by me but the PO had it done. It had a new cam but I'm not sure about the lifters. The cam that's in it sounds healthier than most so I would like the same set up if not too expensive. What should I expect to pay for a new cam and lifters and any suggestions as to brand and specs. Thanks.
|