Been awhile since I posted here but wanted to pass on this Fuel Bowl Tip.
HOLLEY BOWL SWAP, FRONT TO REAR & REAR TO FRONT
I've used them swapped over like that for years on an 800 and 850 double pumper.
Primary bowl on Secondary side: Set fuel level to bottom of threads and then lower the level by 4 flats on the Needle and Seat Adjuster Nut.
Secondary bowl on Primary side: Set fuel level to bottom of threads and then raise the level by 4 flats on the Needle and Seat Adjuster Nut.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|