View Single Post
  #275  
Old 05-06-2019, 02:03 PM
"QUICK-SILVER" "QUICK-SILVER" is offline
Ultimate Warrior
 
Join Date: Feb 2008
Location: LaFayette Georgia
Posts: 5,518
Default

Quote:
Originally Posted by tom s View Post
With all due respect many have been trying to help.Many have asked if you pumped the engine!If it pumps over 180 you could have a problem with pump gas.As said audible is not good at all and you could also have in audible detonation which over time can knock the bearings out of the engine.Good luck with your project.Tom
Dots up with original cam he posted 190 psi.

Should be the same now. Would be interesting to see if it did change. Cam grind changed a little. Or timing sets not made exactly the same.

Cam out of time it needed octane boost.

Voodoo cam made more running compression and needed more octane boost.

Should need less now than in all the past years that he's drove it.

Clay

__________________
All the federales say,they could've had him any day
They only let him slip away, out of kindness...I suppose
Poncho & Lefty

Last edited by "QUICK-SILVER"; 05-06-2019 at 02:11 PM. Reason: signed twice