Quote:
Originally Posted by TheSilverBuick
Getting closer! Installed the intake and exhaust back on the engine yesterday. There is a small list of things I need to do before I can fire it up. The fuel line may need to be slightly changed for the new fuel rail location, the throttle cable is too short so I need a new one, the TPS and possibly the IAC wiring needs to be extended and I need to figure out what I'm going to do for an air filter. Down the road I'll likely make changes to the injector wiring harness.
I've hose clamped a piece of aluminum trim to the top of the intake to help hide and draw eyes away from my welding, lol.
 |
now THAT'S impressive! Love to hear it run!