Quote:
Originally Posted by gavin
If you still want to use the early bellhousing this adaptor plate will work.The main proplem will be that the 64 block is 1/4" longer than the early block plus the plate is 1/4" thick as well.To use this plate you will have to cut the starter plate on the adaptor off at the bottom .you may also have to make a spacer for the starter moter as it might be to deep.But if you want to do I think you can.The plate shown is being set up to adapt early engine to late chev or pontiac trans.The plate has all the holes you will need you just have to pick witch ones to drill or tap.
|
Where did you get that adapter? I need one for my 59 block and later trans. Thanks.
BTW- great thread about these cool old Pontiacs!