[RA462]

Forgive me if I missed this somewhere in this thread. I use -10 fittings at the rear of my High Port heads. Hoses that run under my intake to fittings that are tapped into the stock water crossover. Would you recommend installing allen head pipe plugs in the front of the heads (under the water crossover) with a hole drilled in them the same size as the rear -10 fittings to keep the water flow the same out of both ends? I think I'll tap holes in the center while things are apart so I can add your Y fittings when your have the available. This is a wet deck 535.

Thanks for the great cooling info in here.
Todd