Quote:
Originally Posted by llwta76
A used solid roller and companion lifters is on its way to me from a friend. He doesn't recall the lash it used. Can somebody give me the lash range one can use on the following used cam ? ( 1500 miles of use w/ ~ 20 passes @ the strip) :
Comp Cams special grind solid roller
285/291 @ .015
248/254 @ .050
112 LS inst@108
gross VL= 577/583
I plan on installing it on 110 or 112 ICL
Thanks
|
i use a cam sim to that, havent lashed in a while but i think i am at 18 - 20.
depending on what pistons you have or if they have been worked, you could have enough piston to valve clearance.