Quote:
Originally Posted by old66tiger
Hey Nick. It looks really good. Are the cross member perches in the factory locatuon? If you ever decide to run a TKO or a LGT 700, you may want to consider making these perches about 6 inches longer to accommodate the relocation of the cross member.
Sent from my SCH-R970 using Tapatalk
|
Hey there. The perches are back from the factory location to accommodate the Richmond 4+1 5 speed I have in the other frame now. I think I had to move it back 4 inches from the stock muncie location to make it work. There is room for another few inches if I had to move it again for an LGT700. I also set the pertches down a little bit below stock height so I have room for spacers in case I had to mess with my pinion angle some more. Available adjust-ability is never a bad thing!
__________________
-1967 GTO HO Restomod. PKMM 433ci, SilverSport T56 Magnum 6spd, Moser 9", SC&C and a bunch of other pro touring goodies
- Build Thread
http://forums.maxperformanceinc.com/...615847&page=23