I ordered a stainless steel dipstick tube from our host yesterday so I should have everything I need by the time my block is done. I will be doing reassembly and am wondering If I should use blue lock tight on the threads of the rod studs upon reassembly?
__________________
1967 GTO, 432 (428+.030), 4-bolt mains, factory Nodular crank, scat rods, icon dished pistons, Lunati HR 243/251@.050, .618/.622 lift, Edelbrock 72cc round port heads, 10.5:1, offy 2-4 intake, Edelbrock 650cfm carbs, Super T10 trans (2.64 first), BOP 10 bolt w/ Eaton posi and 3.36 gears
|