Quote:
Originally Posted by Cammer-6
no but youre trying to line up the crank pulley with the WP pulley.
You can move the WP pulley and eliminate the crank spacer
|
Oh, I get it now, yea, that was mentioned somewhere and is possible for anyone that wants to do that. It should work the same. You would also have to press the ps pump pulley on a lil more. The only reason I chose to go with the spacer is from an awful memory I have of the time I had to replace my waterpump in a mall parking lot about an hr from home after the waterpump bearing violently exploded with no warning signs. I was lucky enough to be close to a napa and had all the tools I needed to be back on the road in a short time. I would have been kicking myself if I needed to modify the waterpump via a shop press before installing it. probably would have had to tow the car or leave it overnight.
This happened many years ago before the serp install.