View Single Post
  #96  
Old 10-23-2012, 06:38 PM
DevoBuzz's Avatar
DevoBuzz DevoBuzz is offline
Senior Chief
 
Join Date: May 2002
Location: NJ
Posts: 293
Default

From JEGS:
-5cc flattop SRP forged pistons.

Pontiac 461ci Rotating Assembly

Compression Ratios:
11.5:1 with 75.2cc
10.4:1 with 85cc
8.5:1 with 111cc

http://www.jegs.com/i/Eagle/356/51400/10002/-1

Now of course SUMMIT says differently:
Piston Material Forged aluminum
Piston Style Flat top, with two valve reliefs
Piston Head Volume (cc) +5.00cc

http://www.summitracing.com/parts/ESP-51400030/

From Eagle website:

NOTE! - compression ratio calculated assuming uncut block and .040" head gasket, 87CC head
part number engine CID crank rods pistons bore sizes comp. ratio price
51400 461-468 cast 4.2500" 6.800" H-Beam -6.0cc forged Mahle .035 .065 9.94 1718.75
51500 461-468 4340 4.2500" 6.800" H-Beam -6.0cc forged Mahle .035 .065 9.94 2093.75
51501 488-495 4340 4.5000" 6.800" H-Beam -6.0cc forged Mahle .035 .065 10.47 2093.75

http://www.eaglerod.com/index.php?op...d=33&Itemid=40

__________________
1972 LeMans
461 stroker 10.3:1
Edelbrock D ports Scorpion 1.5 rockers
Comp Cams "Stump Puller" roller
Holley Ultra Street Avenger 770
Ram Air III exhaust manifolds
2.5" pipes Dynomax VT w/crossover
Edelbrock Performer RPM
TH350 2.78:1 10 bolt

Last edited by DevoBuzz; 10-23-2012 at 06:50 PM.