Well, here's some more progress in the last few month's. I have the pass quarter completely welded on and will need a pic for this. I'm getting all those little rust holes from the seams(consider yourself pretty lucky if you have a car not exposed to the snow belt or one that hasn't sat outside for long periods of neglect) that reside under the rear seat. Good news on the lower winshield, mine appears pretty solid(whew) yet the drivers side lower cowl seems to need alot(pics coming on these too. I also got the shaker fit and welded in a 3/16" flange around the opening that has little to no wave from the heat or lack there of... Getting there...
|