Thread
:
Bore Spacing (An Engineer's Thoughts)
View Single Post
#
8
04-06-2012, 06:40 PM
Half-Inch Stud
Ultimate Warrior
Join Date: Jul 2000
Location: BlueBell, PA or AL U.S.A.
Posts: 18,481
PMD's V8 crank is oh say 7" shorter than their OHC-6 crank, so we gots plenty of bore spacing to run 5" bores.
I figured the real HP occurs in the 5-6" diameter bore. so let's see action.
Reply With Quote
Half-Inch Stud
View Public Profile
Send a private message to Half-Inch Stud
Visit Half-Inch Stud's homepage!
Find all posts by Half-Inch Stud