Showing results 1 to 25 of 500
Search took 0.09 seconds.
Search: Posts Made By: chuckies76ta
Forum: Pontiac - Street 01-11-2025, 06:09 PM
Replies: 60
Views: 2,882
Posted By Formulajones
Correct, the drain back valve also provides this...

Correct, the drain back valve also provides this function as well.

Basically when sitting gravity will pull oil back down from the gallies into the filter. The thought is that gravity will force...
Forum: Pontiac - Street 01-11-2025, 02:35 AM
Replies: 60
Views: 2,882
Posted By Schurkey
No anti-drainback valve means the oil in the main...

No anti-drainback valve means the oil in the main oil galleries ABOVE the filter can drain back. More air in the oiling system above the filter means it takes fractionally longer to get oil to the...
Forum: Pontiac - Street 01-10-2025, 07:35 AM
Replies: 60
Views: 2,882
Posted By jerry455
The GM bulletin is about using the correct PF63...

The GM bulletin is about using the correct PF63 and 64 oil filters instead of using the similar sized PF48 filters in the newer engines.
Forum: Pontiac - Race 01-08-2025, 06:05 PM
Replies: 17
Views: 841
Posted By Scott Stoneburg
I have Moroso Springs up front with Comp...

I have Moroso Springs up front with Comp Engineering 3 way adjustable shocks, rear I have Cal trac split mono springs with Cal trac single adjustable shocks. I just need to play with the settings to...
Forum: Pontiac - Race 01-08-2025, 04:07 PM
Replies: 17
Views: 841
Posted By Scott Stoneburg
Rear gear is 3.70s and 275/60-15 Drag radials....

Rear gear is 3.70s and 275/60-15 Drag radials. The fastest it's been in the 1/4 is 10.20 @ 131. That was with my 474 and Edelbrock heads. I can't remember the 1/8 time on that run. I run it at an 1/8...
Forum: Pontiac - Race 01-08-2025, 12:44 PM
Replies: 17
Views: 841
Posted By Scott Stoneburg
Rockers are really nice, the stands come as...

Rockers are really nice, the stands come as individual stands, designed to be pinned to the head. I had straps welded to the stands once they were set to make them solid together.
Forum: Pontiac - Street 01-08-2025, 12:16 PM
Replies: 60
Views: 2,882
Posted By mgarblik
That's a really good bulletin from Champion labs....

That's a really good bulletin from Champion labs. It shows design changes on a variety of their filters. Just looking at the changes, I don't see where more holes is a cost saving measure. To the...
Forum: Pontiac - Street 01-08-2025, 11:43 AM
Replies: 60
Views: 2,882
Posted By 78w72
Not sure what youre showing on the left filter vs...

Not sure what youre showing on the left filter vs right, but the right filter looks to be one of the newer redesigned style filters from champion labs who makes many different filter brands.

I...
Forum: Pontiac - Street 01-08-2025, 11:10 AM
Replies: 60
Views: 2,882
Posted By Formulajones
Yep, just because it says a brand name on the...

Yep, just because it says a brand name on the product doesnt mean it's the genuine article. I mentioned this earlier in this thread.

Just because it's cheaper doesn't mean it's a deal. Better off...
Forum: Pontiac - Street 01-08-2025, 10:59 AM
Replies: 60
Views: 2,882
Posted By Mook
Yes sir.... left is the one I received from...

Yes sir.... left is the one I received from dealer website on Amazon.
Forum: Pontiac - Street 01-06-2025, 01:37 PM
Replies: 40
Views: 1,288
Posted By PontiacMatt72
Personally, I’d be wary of the “driveline...

Personally, I’d be wary of the “driveline components” and eBay version… they look the same as the MDL unit, maybe a ripoff?

I appreciate all the feedback.

I think im between the MDL Qwik-Stik...
Forum: Pontiac - Street 01-06-2025, 01:15 PM
Replies: 40
Views: 1,288
Posted By 65madgoat
Should be. And that is a nice shifter with...

Should be. And that is a nice shifter with bellville washers. Ran one once. Just like the White Lightning more with adjustable bias.


Qwik Stik as seen on ebay too:

...
Forum: Pontiac - Street 12-31-2024, 10:40 AM
Replies: 20
Views: 525
Posted By 78w72
If you have aftermarket heads or changed the...

If you have aftermarket heads or changed the block deck height at all, you cant use the pontiac non adjustable valve setting of just tightening all rocker nuts to 20lb/ft... you need to do the...
Forum: Suspension TECH 12-30-2024, 09:53 PM
Replies: 33
Views: 1,042
Posted By Formulabruce
Leaf spring ride

I have been helping a buddy restore his 70 Formula.
We added some hidden updates to make it more modern day friendly.
Aside from the bolt in, no mod Silversport 5 speed, I kinda pushed him into...
Forum: Pontiac - Street 12-23-2024, 07:18 PM
Replies: 13
Views: 517
Posted By max 93
Mr gasket 914. They also have the thinner head. I...

Mr gasket 914. They also have the thinner head. I also think ARP for a Dodge application are the correct size.
Forum: Pontiac - Street 12-13-2024, 11:47 AM
Replies: 94
Views: 3,256
Posted By Holeshot71
I had a car one time that was real sluggish when...

I had a car one time that was real sluggish when taking off from a start. Turns out it was starting off in second gear due to a sticking Governor.
There’s a lot of good information posted here. You...
Forum: Pontiac - Race 11-29-2024, 02:10 PM
Replies: 3
Views: 329
Posted By mysticmissle
I don't want that style, I need room for hot side...

I don't want that style, I need room for hot side pipes at some point thank you though
Forum: THE LOBBY 11-13-2024, 12:46 AM
Replies: 25
Views: 1,498
Posted By jhein
Back in the day I was extremely hands on with my...

Back in the day I was extremely hands on with my car. For better, or worse. I didn't do everything right, but I did it anyway. My older brother had a really nice 78 TA. It was Chesterfield Brown...
Forum: Pontiac - Street 11-12-2024, 09:39 PM
Replies: 52
Views: 2,262
Posted By scott70
Im on the lookout for a rubber mount thats at the...

Im on the lookout for a rubber mount thats at the correct thickness. I ordered a new speedo gear from silversport ,,,,18 tooth instead of 17,,,,and tremec fluid for the change from dextron 3. I asked...
Forum: Pontiac - Street 11-12-2024, 11:37 AM
Replies: 52
Views: 2,262
Posted By mgarblik
Following this thread. It seems like you may...

Following this thread. It seems like you may have a couple things going on here. Problem 1 is the vibration you describe. Problem 2 is the clutch chatter. IMO, you may need to divide and conquer....
Forum: Pontiac - Street 11-11-2024, 08:13 PM
Replies: 52
Views: 2,262
Posted By scott70
I used the 11” super street pro clutch kit. The...

I used the 11” super street pro clutch kit. The machine shop said the pressure plate was not balanced very well but were able to put the pp on the flywheel and get it to the same imbalance as the oem...
Forum: Pontiac - Street 11-11-2024, 03:39 PM
Replies: 1
Views: 181
Posted By CraigG.
Happy Veterans Day!

Thanks to all veterans, their families and those who serve our veterans.
Respectfully, Craig
Forum: Pontiac - Race 11-11-2024, 03:39 PM
Replies: 1
Views: 169
Posted By CraigG.
Happy Veterans Day!

Thanks to all veterans, their families and those who serve our veterans.
Respectfully, Craig
Forum: THE LOBBY 11-11-2024, 01:33 PM
Replies: 25
Views: 1,498
Posted By KS circutguy
Thumbs up The greatest LOST & FOUND car story we've ever heard! Pontiac Trans Am

Love this story.
Most car guys will be in tears after watching it.
https://www.youtube.com/watch?v=sE169_QdV-A
Forum: THE LOBBY 11-11-2024, 12:40 PM
Replies: 15
Views: 596
Posted By 433lemans
Happy Veterans Day!

To all vets as well as active duty. Have a GREAT Day!
USN Aviation Structural Mechanic 2nd Class
1971 to 1975
Showing results 1 to 25 of 500

 
Forum Jump

All times are GMT -4. The time now is 03:36 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017