Low compression on left cylinder bank
Have stock 65" 389 engine... engine has extreme blow by through valve cover dipstick tube and also smoke under the intake manifold..measured compression passenger cylinder bank has solid 175 psi on all cylinder but driver side only 70 psi on all cylinders..any ideas what could be the the problem..no water in the oil..
|
Yes, either 4 pistons with cracked compression rings and or 4 cracked pistons along with some compression rings
|
I had this happen with a Olds 425.
I installed a Mondello cam. Most pre-1967 Olds V8's had 45° lifter banks going to 39° in 1967. The 425 was a 1966 motor but they sent a later 39° cam. Compression was significantly different bank to bank; 8:1 one side, 10:1 the other. |
So thats interesting so you think in your case it was the cam ..despite i dont understand the reason....i also cant believe that all 4pistons or rings have the same damage since i ill have excatly the same compression on the whole bank..still wondering..
|
Dumb question, but have you checked the torque on the head bolts on the driver's side?
|
Blown head gaskets could account for low compression in two cylinders right next to each other without any fluids leaking as I have seen that many times , but even if you had a very strange happening of enough head bolts being loose to make for across the board low compression, I can’t see having the level of blow by that you have!
|
If you have broken rings if you get a bore scope you will see scratched up cylinder walls.
|
Quote:
If the sealing of the cylinders is nominal ie rings, valves - then the only thing affecting the compression is ratio and timing. Thinking about this it just came to me that I would not be surprised to find the wrong pistons, installed wrong or different compression heads (or a combination of the 3!). I wonder what a leakdown test will find? |
Quote:
|
Thanks for all the input...will look at the engine closely next week..
|
Burnt valve, maybe?
|
All times are GMT -4. The time now is 03:22 AM. |