What's the best way to install the pan with a scaper? What the best clearance from the crank to scraper? Pan is a '68 wt, stock windage tray with four 3/4" holes for the drain back. Any oil leak free advise welcome! Guy
|
What's the best way to install the pan with a scaper? What the best clearance from the crank to scraper? Pan is a '68 wt, stock windage tray with four 3/4" holes for the drain back. Any oil leak free advise welcome! Guy
|
There was a thread on this earlier. Try searching for "crank scraper" in this forum.
|
All times are GMT -4. The time now is 04:02 PM. |