I finished the front 2 pieces and ran into a bit of problem.
It seems as tho 1 or 2 out of the 3 NOS pieces Im using for patterns is wrong.
I need a good close up of the outer stripe on all 3 pieces. Also if anyone has a real accurate caliper to measure these it would help. I dont need a pic of the complete stripe just a close up section to determine which is the thinner of the outside pieces.

I finished the front 2 pieces and ran into a bit of problem.
It seems as tho 1 or 2 out of the 3 NOS pieces Im using for patterns is wrong.
I need a good close up of the outer stripe on all 3 pieces. Also if anyone has a real accurate caliper to measure these it would help. I dont need a pic of the complete stripe just a close up section to determine which is the thinner of the outside pieces.

passenger side please

ill take the picture and measurements when i get home

whats ur email the pic is too big for here

Can anyone provide some detailed measurements so I can finish this project up. The NOS stripes I have are incorrect on door stripe I believe.

When do you estimate that the stripes will be available and will they be sold through PY or who?

I have some ready now but am awaiting verifcation
that they are exact in detail.

I've been waiting to order some when you are ready to ship. What color combinations are available and what would be suitable on a cameo white GTO with black vinyl top.

Thanks.

Black/red would be the only choice.
Other color is white/red.

Would you let me know when you are ready to sell some of these stripes. I've been wanting them for a while now.

Randy Frazier
Ramair71@aol.com

How do I contact you other than e-mail?

I would also be interested in a set for my car when they are available.

WAHOOO!!! Nice work Mr. Cammer!

I am glad to see that you are putting serious time into the detail of these stripes. Thank you so much! My pontiac thanks you and is ready when you are.

Joey

I still havent got the exact measurements on the outer top and bottom stripe width from anyone.It would be a shame to let this project die due to
inaccuracies.

I think i have 3 fenders I can check that still have the original stripes on them are you wanting to know the width of the outer tape (stripe) or the overall width of the stripe from top to bottom? let me know I would really like to see this work out for all interested.

I made an etching/trace of mine before removal. Would this help?

Joey

Both of you could help.
Im not sure if the NOS ones I have are crap or if they all were crap when installed. If you dont mind tell me how I can email you to get your Ph#s.
If you post your email addys please change something so it cant be harvested.
thanks

Cammer6, please go to the post "some GT-37's" somehow we ended up getting side tracked over there and I have posted some pics for the stripes.

Thanks T/A

Craig,Tim I caught the other thread under GT-37s but hadnt read that for awhile(only read it when the first attempt was made to post pics) My main computer caught a cold even with firewall and NAV and its been sick for alittle over month. Im using my laptop now so hopefully I made backup copies of the program.I have a new computer but havent transferred everything over to it yet. Hummmm, I have 5 computers here... getting about like my car collection.

Sorry Craig,need to proof read B4 launching
How do you edit on this board(or can you?)