R.A.R.E Product Question - Need Help
Does anyone know if the oversized Ram Air Restorations round-port exhaust manifolds (64-67) work with an IA2 block without any material needing to be removed?
If grinding/modifications are required, where exactly? Block side I'm assuming (deck surface edge on drivers-side)? |
IIRC, we had to use a pair of header flanges to space my round port super long branch manifolds with the 3" outlets away from my IA2 block due to an interference issue.
|
Even my Hooker headers that cleared a stock bock I had to hammer #1 tube to clear the freeze plug boss.
|
Do you have the manifolds? Just curious. Thx
|
Quote:
I am wanting a set or will go the Hedman Header 2" primary tube route (part # 35030). Trying to find a contact who has put .250 spacers under the frame motor-mount attachments and still was able to fit a 4-speed without trans tunnel modifications AND still have clearance for a Lakewood bellhousing at the firewall opening (at the top of the opening). 1965 GTO. Stock suspension/frame. |
I had asked previously around here about the spacers but didn't really get much of a response. Definitely a proprietary item. For me, I had heard, or maybe wanted to hear, that you didn't need the special 65-67 Ram Air Restoration RP manifolds with the spacers. But that didn't go anywhere. As far as the manifolds, I wouldn't hold my breath. They're not likely to show up anytime soon. If they do show up and I look like a fool, then I'll be a happy fool. Even D port stuff is scarce at this time. I hope that someone can better answer your question. I do know that RP headers take up a lot of real estate with those 1 7/8" primaries.
|
If all else fails and you have to have RARE and want the straight info call Paul!He told me most info found on the internet is not true.That how I found the 68-72 fit fine on 64-67.Call!
|
Hooter (member) on here had success with the Hedman 2” #35030 headers.
Maybe I’ll reach out to him directly. |
Is there anyone you can borrow a pair from for mock up? You could use several header gaskets to determine the spacing you need. I have a new set of Doug's that I got about 12years ago for '64-'67 round port if you are interested.
|
Quote:
Thanks, Chris |
He said they just bolt on!The other way,early on late can have a little clearance issue.To be sure give him a call and ASK,Paul,can I put your 68-72 RA manifolds on a 64-67 without issue.Tom
|
All times are GMT -4. The time now is 10:01 AM. |