Wilwood Rear Disc setup
 

Just bought Forged Dynalite Pro Series 140-11008-d For my fronts. I'm trying to find the correct part number to match the rears. Thanks.

There are a bunch of different fronts. The old typical was Dynalites with a 10.75 rotor -what I have on the IA/Camaro. They now has a 12.19 dynalite as well as a Superlite caliper with a bigger pad. Dynalite pad is kind of small from a front to me.

i have a fairly brand new rear set if your interested only on car for a few months

My fronts are Dynalite Pros 140 -11008-d's...looking for the corresponding rears..I want to get away from the factory rear calipers..

So did I, the ebrake was very poor. I now have the 11.6" S10/Blazer setup with the drum in hat ebrake and have been very happy with it.

Very easy to upgrade to 12" from S10.

As long as piston size is the same(front to rear) on the dynalites should be OK. I'd just T the fronts(or use a line lok as a T) and an adjustable prop valve in the rear line.

I'm using the Forged Dynalite Pro Series rear brake 140-5236-B on the rear.
12.19" rotor
I run a 15-inch wheel but they note to check the wheel for clearance to see if they fit your specific wheel.


.

I have the wilwood 12.19 brakes front and rear with 15" wheels all around.

Thanks guys...looks like I'm just doing the front this year. I have had a bit of an engine issue that I need to resolve first.