COMING SOON...
|
:popcorn:
|
Yes!
|
ENGINES;
2 Attachment(s)
1968 / 9790**, ZN, 1BC-A.T. (SPINS) $300 OBO
1968 / 9790**, ZN, 1BC-A.T. (STUCK) $150 OBO 1967 / 9787**, ZD, 4BC-A.T. ( ¼ TURN) $700 OBO 1966 / 9782**, ZE, 4BC-A.T. (POSS RUNNER) PENDING. |
1968 / 9790**, ZN, 1BC-A.T.
5 Attachment(s)
$300 OBO
Rotates Freely. Sold As Is, No other parts for this engine. You arrange for pick up/shipping. |
BELL HOUSING & FLYWHEEL
used on 1966 1967 1968 & 1969 Tempest, Lemans, and Firebirds with manual 3 or 4-speed transmissions.
Bellhousing has a minor chip on the bottom. Flywheel has been cut and no longer has the factory step. This should not pose any issues with resurfacing and using it. Sorry, no inspection cover. $225 plus shipping for both. |
POWER STEERING MOUNTING BRACKET WITH HARDWARE AND BRACE.
Used on all OHC 6 1966 1967 1968 and 1969 engines with PS.
These little brackets are truly getting hard to find. Most I see online are usually broken. $175 Plus Shipping. |
1966 4BC HEAD
1966 CYLINDER HEAD FOR THE FOUR BARREL ENGINE aka SPRINT.
$200 Plus Shipping |
1966 Pontiac OHC 6 Aluminum Timing Belt Cover.
This is a ONE-year-only piece.
I only have the top cover piece no other parts of the belt cover. $200 Plus Shipping. Like the Aluminum Camshaft Housing, this cover can be polished to a high shine and looks outstanding when done. Thus why you can't find these to easily. Will fit on all 1966, 1967, 1968, and 1969 OHC 6 engines with the correct bracket. |
1967 4 BARREL INTAKE & EXHAUST MANIFOLDS
The heat Gate was removed but otherwise in good condition.
This will bolt on to all Pontiac OHC 6 Heads; 1966, 1967, 1968, 1969. $375 plus shipping. |
1966-1967 4 BARREL CAMSHAFT
I have this on file as used on both 1966 & 1967 4BC engines.
#9792538 Still mounted in Cam House and Lobes are in really nice shape. $250 Plus Shipping |
1966-1969 ENGINE MOUNT FRAME BRACETS
Used on all A-Body Models
$100 Plus Shipping |
1967-1968
Duel Groove-2 Belt Fan Pulley.
$75 Plus Shipping |
AUTOMATICE TRANSMISSION FLEX PLATE
Used on all AT engines.
$100 Plus Shipping |
1967 4BC ENGINE
1967, 9787**, ZD, 4BC (aka SPRINT) W/ Manual Transmission.
This is a true barn find and will need a complete overhaul. Engine Rotates. No other parts for this engine. $650 Your arranged pick up/shipping. Thanks. |
CORRECTION;
The 2-belt pully is a 1966 fan W/PS App.
I have single Belts Pullies as well. Thanks. |
1966 4BC MANIFOLDS
The center divider is hogged out, but as mentioned in another post would work but likely be a heavy drinker. Better suited for an EFI setup.
Anyhow what you see is what it is. $125 Plus shipping |
1967 Duel Groove Power Steering Pump Pulley
For use on models with AC.
$60 Plus Shipping. |
1967 POWER STEERING SINGLE GROOVE PULLEY
Could work on other years as well.
$30 Plus Shipping. |
1966-1967 PISTON RODS
6 PACK.
$50 PLUS SHIPPING |
1966-1968 ENGINE MOUNTS
Used set, Good for mockup and/or short-term use.
$75 Plus Shipping |
For those who asked.
Click on the image for a short clip.
1968 1BC; https://live.staticflickr.com/31337/...c20930c5_b.jpg68 1BC X by J. Hamlin, on Flickr 1967 4BC; https://live.staticflickr.com/31337/...a254989a_b.jpg67 4BC X by J. Hamlin, on Flickr 1966 4BC, Not listed yet. Going to be soon; https://live.staticflickr.com/31337/...35031ef2_b.jpg66-4BC by J. Hamlin, on Flickr Open to all questions and offers. Cheers. |
FRIDAY PRICE DROPS
The following changes to pricing are as follows;
68 1BC engine $300. BELLHOUSE & FLY $200. PS MOUNT $125. 66 4BC HEAD $150. 66 ALUMINUM UPPER BELT COVER $150. 66 4BC MANIFOLDS $325 66-67 4BC CAM $200. 66-69 A-BODY ENGINE MOUNT FRAME BRACKETS $95. 66 2-BELT FAN PULLEY $60. 66-69 AUTO TRANS FLEX PLATE $95. 67 4BC ENGINE $600 66 4BC MANIFOLDS W/INTAKE MOD $100. 67 2-BELT PS RES PULLEY $50. 67 1-BELT PS RES PULLEY $25. 66-67 230 RODS $45 66-69 A-BODY ENGINE MOUNTS $45 SHIPPING COSTS ARE NOT INCLUDED AND WILL VARY BASED ON YOUR LOCATION. Have other parts not listed, LMK what you need. I may have it. CHEERS. |
67 INTAKE (LAST IMAGE) IS SOLD.
THX. |
67 4BC ENGINE SALE PENDING.
THX. |
2 Groove PS Pulley Pending Sale.
Thanks. |
THE 1967 4BC ENGINE HAS BEEN SOLD.
2-GROOVE PULLEY HAS SOLD AS WELL. THANKS. |
1968 / 9790**, ZN, 1BC-A.T. (STUCK)
Started to tear it down, and surprisingly not too bad.
Selling all parts. LMK if you need anything. Thanks |
Cam
...
|
More Bits...
Soaked and Soaked but still would not spin, Broke down with minimal effort, and found zero corrosion. Lots of oily parts but no rust. I think it just sat way too long.
In case you're not aware the short blocks between 1BC & 4BC are the same so this crank and rods will fit nicely into your "SPRINT" build ;) |
FYI
For anyone interested in parts I will be attending Norwalk and can deliver parts that are prepaid for.
Cheers. |
Aluminum Belt Cover Sale Pending;
|
NORWALK.
As mentioned I may be bringing some bits to NORWALK.
I will be going through the Bins this week to pull the Pre-Paid parts and likely some other small parts. LMK if there is anything you might be after. Cheers |
'66 Aluminum Timing Belt Covers have been SOLD.
Thx. |
THE '66 TIMING BELT COVER & HEAD/CAM HAVE BEEN SOLD.
THX, |
UPDATE
The following changes to pricing are as follows;
68 1BC engine $250. BELLHOUSE & FLY $150. PS MOUNT, SOLD. 66 4BC HEAD $125. 66 ALUMINUM UPPER BELT COVER $150. 66 4BC MANIFOLDS $325 66-67 4BC CAM $200. 66-69 A-BODY ENGINE MOUNT FRAME BRACKETS $95. 66 2-BELT FAN PULLEY, SOLD. 66-69 AUTO TRANS FLEXPLATE, SOLD. 67 4BC ENGINE $600 66 4BC MANIFOLDS W/INTAKE MOD, $95. 67 2-BELT PS RES PULLEY, SOLD. 67 1-BELT PS RES PULLEY $25. 66-67 230 RODS $45 /6 66-69 A-BODY ENGINE MOUNTS, SOLD. SHIPPING COSTS ARE NOT INCLUDED AND WILL VARY BASED ON YOUR LOCATION. |
UPDATE;
The following changes to pricing are as follows;
2-68 1BC engines, $300 BELLHOUSE & FLY $150. PS MOUNT, SOLD. 66 4BC HEAD $125. 66 ALUMINUM UPPER BELT COVER. SOLD 66 4BC MANIFOLDS $325 66-67 4BC CAM. SOLD 66-69 A-BODY ENGINE MOUNT FRAME BRACKETS $95. 66 2-BELT FAN PULLEY. SOLD 66-69 AUTO TRANS FLEXPLATE, SOLD 67 4BC ENGINE. SOLD 66 4BC MANIFOLDS W/INTAKE MOD, PENDING 67 2-BELT PS RES PULLEY, SOLD 67 1-BELT PS RES PULLEY $25. 66-67 230 RODS $45 /6 66-69 A-BODY ENGINE MOUNTS, SOLD SHIPPING COSTS ARE NOT INCLUDED AND WILL VARY BASED ON YOUR LOCATION. |
Dang I missed the double groove power steering pump pulley
Sent from my SM-S515DL using Tapatalk |
All times are GMT -4. The time now is 05:01 AM. |