YZ Bare block in NC
I picked up this block last week.
Here are the codes. Front of Block 005534 (Above the letter code) YZ 101030 (Beside timing cover area) (In front of this number there are 3 very light stampings..maybe numbers 283 or 28E??) Back of block G067 July 6th 67 cast date 9790371 (Some of these were hard to make out but what I have looked up it should be for a 1968 400 HO 360 Horsepower) The block is .030 bored and was ran. It had a rod break and at the bottom of one of the cylinders there is a notch where the rod hit. Some small dings in the cylinder too. Dings may clean up with boring or may need a sleeve? I have done nothing but take it apart. If im wrong on any info I have gotten from the codes I dont mind you correcting me. $500 (Wont ship) May trade??? 704-682-3057 Statesville,NC Ponattack1@aol.com :usa2: |
I'd say the letters are 28B which is the partial VIN of the car it was originally in.
The block casting code is probably also 9790071. It is the HO block though with the YZ code. :) |
Quote:
|
B would be for a Baltimore built car.
patrick |
John, most of the ones I've seen actually use the 8 instead of the B.
Don't know why - anybody back me up on that? |
He said he couldn't tell what the 3rd digit was 28E101030 or 283101030.
I think it is 28B101030, which is the Baltimore plant as said. The '2' is for Pontiac The '8' is for the year, 1968. The 'B' is for the plant, B-Baltimore No Buicks were hurt in this episode. :) |
I understood you, I'm saying they used the 8 instead of the B. I'll have to see if I can get a picture of one.
|
I'd like to see the pic.
:) |
How close are you to Ashville..
Thanks Bruce |
Quote:
|
Sounds good when I get back in town Ill let you know and run over souds good..
Bruce |
Quote:
Thanks Russell:usa2: |
LOOKS LIKE ANOTHER 3 -4 WEEKS BEFORE IM BACK IN TOWN .IF THE BLOCK IS STILL AVAL ILL SEE YOU THEN
BRUCE B |
YZ block still FOR SALE
|
Still FOR SALE!!!
|
....and...Still For Sale.
|
Will also trade...What ya got???
|
I still have the block. Would consider trades??...Maybe a regular 428 or 455 shortblock? Or??? What have ya got?..CA$H still works good too!!!:usa2:
|
I could build you a sweet TH400 for Street/Strip with either the Pontiac or Chevy Bell Housing.
|
Quote:
1st with a TCI trans brake,Super bell,Blue plate clutches,coated steels,etc.....0 passes on it 2nd Borg warner clutches,reverse manual valve body,etc 3rd Borg warner clutches LOW 1st/2nd gear set,Forward manual valve body,etc I will still keep your offer in mind. Thanks Russell :usa2: |
All times are GMT -4. The time now is 03:12 AM. |