Filled 455 short block for sale
 

This is a little weird guys because I don’t remember every detail.
About 2017 I bought an engine Frank (All Pontiac) was listing for a friend who had passed. I sold the heads to lower the compression and installed 87cc heads.
It’s a 455 filled to the soft plugs. Steel 4 bolt straight main caps with arp studs. Lifter valley brace
Scat 4.21 forged crank
6.8 Callies Comp Star h-beam rods
CP gas ported pistons with a slight dome.
Moroso oil pan.
Comp solid roller cam .750 lift? Ground at 110? .270@.050? Not exact but close.

With 335 cfm (87cc) Edlebrocks this engine made 735hp. It ran 6.40s in a 3400lb car at 3200 feet.

I’m keeping the heads for a future blown project so just the short block is for sale.
$3500 plus shipping.

How much dome? What was compression with the 87cc heads?

Pretty sure it was just over 11:1

I’ve changed my mind on keeping the heads. They’re 335cfm (87cc) Edlebrocks with T&D 1.65 shaft rockers. All this engine needs is an intake and carb.
$7,000.

Found the cam card, I was close. It’s 282@.050 I&E, .750 lift, ground 110

What is the bore of the block, and where are you located?

4.19 bore
Just ran across Franks old ad, it’s an Ohio forged 4.25 crank for a total of 468”
I’m in South Dakota

pm sent

Also interested if still available?