Dyno Time
Tomorrow i am finally taking my engine to the dyno.
Its a 535 MR1 with 430 Highports BOP intake and a 1300 Prosystems carb. 14to1 compression running vp113 fuel. Lets hear your guesses on what it will make. |
Try 925HP.Tom
|
Good luck!
|
900ish
|
Lot of r&d on the heads and intake, cam? If so 1000.
|
905hp, 725 lbft tq.
|
Old cam 278 intake and 292 exhaust on a 114 cl it made 920hp
|
New cam
1 Attachment(s)
Pic of cam card.
|
Whew!!! That's a healthy cam! What ratio rockers are you using?
|
1.65
|
Hey John, 910HP ..
|
1020
|
Hey Charlie. I hope it's not less than before. Lol.
|
I'll revise my guess, given more info about the previous Dyno and cam specs, 975hp
|
955h / 820t
|
What's the difference between this build and previous one?
|
945 HP 790 TQ
|
Nice build!
983 hp :drive: |
New cam, steel rods and heads.
|
Why that 113 on that cam?
I don’t think such will help your VE, but non the less I hope you reach your target power numbers. |
All times are GMT -4. The time now is 06:35 AM. |