Has anybody heard of this guy?
2 Attachment(s)
Not sure what to make of this dude....he's beyond arrogance and narcissism....I'm thinking megalomaniac....
|
1 Attachment(s)
LOL...unbelievable.
|
|
Quote:
|
Watch the youtube video.
|
Of course I know of him. He's on every forum I've ever been on.
|
I'm always relieved when it's not me.
K |
Not even a caveat for detonation.
|
Fulper 2.0
|
Quote:
Cliff has talked to him about carb tuning and had a great post on here recently about his insanity. A couple guys doing big things with 301's have called him out too & all he can do is block them. One guys shop has had some of his max tune stuff that destroyed their engines. BW has a "stage 3 or 5 or 10" (his own made up ridiculous claim) 301t that has to run 3-4 bottles of octane boost per tank or race gas because it severely detonates on even mild half throttle runs at like 6lbs of boost! LOL! Dude is a clown but a legend in his own mind. |
Quote:
|
Seen him quite a bit on Crackbook lately. Especially pushing 40-50 deg idle timing.
|
50* of timing…that’s a fuel car tune!
|
That's one of the great things about being a self-appointed expert. Anyone can qualify. :)
The timing thing hits home for me. There used to be a guy running a dark green GTO convertible at Gateway. His car was pretty quick (10.0ish IIRC.). He asked me how much timing I was running. I told him 34 total. He says that's WAY too much! You shouldn't be running any more than 28 total. Yeah, ok... |
Just another Arrogant know it all, been kicked out from many groups, and blocked by many more, does not take well to opposing views and opinions.
|
Pretty much a first class douche IMHO. I never heard of him till a few months ago when he called here looking for jets .080" and larger main jets for a Quadrajet carburetor. Coincidentally it was the same carb I ran on the 455 in the Ventura for decades and 73 jets were PLENTY for it.
I really didn't get to say much and really didn't listen to all the BS he was pushing. It wouldn't have done any good as the conversation was one-sided. The few times I tried to say anything he blasted right back with more BS before I could get any words out. He did mention running "locked out" timing on all his street engines. I was told that after our one-sided conversation he went on Facecrack and told everyone he's talked to me and that I agreed with his tuning methods. I heards there is a Facecrack page you can sign up for, something like a group that has been banned by Bill Webb. I don't really much give a chit these days about guys like him and how or why they think that there methods are going to work with these engines. I really have more important things to do these days, like throw sticks for my dogs and spend time with my grand kids...... |
He sounds like an idiot who has been ignored too much. And FYI, I dont know crap, and Ive been tuning carbs with an 02 sensor, since 1992.
|
He sounds like someone who has struggled to be heard his whole life... and now that he finally learned how to use the internet, he's self professing his fame on social media. And FYI, I dont know crap, and Ive been tuning carbs with an 02 sensor, since 1992, so it's not extremely rare.
|
Kinda sounds like this gentleman may have spent considerable time working with the Chrysler Lean Burn System? We all know how that worked out for them. Also when you run crazy ignition lead and lean mixtures, the NOX emissions go through the roof. Sounds like a recipe for lots of failed parts to me. I tend to listen to people carefully who have a long history and track record of success. People who spend most of their time actually testing things and reporting results, who talk little about their credentials and more time posting specific information that makes sense.
|
Maybe I'm missing something, but the first question that comes to my mind is how do you start an engine with that much timing? My cars have difficulty starting with ~15 degrees initial timing (they'll crank real slow). How does it work with 40-50 degrees?
Importsmasher |
All times are GMT -4. The time now is 02:26 AM. |