PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   Pontiac - Race (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=419)
-   -   68 bird out of Bob Maxey’s shop years ago (https://forums.maxperformanceinc.com/forums/showthread.php?t=863895)

chiefbigb 01-10-2023 01:53 PM

68 bird out of Bob Maxey’s shop years ago
 
2 Attachment(s)
Picked up a 68 street strip car built back in the later 80s. Family owned for over 30 years. One of Bobs employees built the car there. Thought I would share it.

PAUL K 01-10-2023 02:29 PM

Nice! Very cool. Bob Maxey is a Pontiac Legend.

sdbob 01-10-2023 02:47 PM

Nice. I spoke to Bob once by phone. Besides Pontiacs we had other things in common.

Scott Stoneburg 01-10-2023 09:47 PM

Great looking Bird. What's your plans?

chiefbigb 01-10-2023 11:16 PM

It's a very solid car put together with good parts. The engine is fresh but has been sitting a few years. Going to pull the heads and inspect. Reassemble then enjoy.

Tom Vaught 01-11-2023 12:14 PM

Several conversations with Bob Maxey over the years and a Canadian Racer friend of
his. RIP Bob. Very nice car and assume well constructed.

Tom V.

aaronman 01-11-2023 04:27 PM

Super cool! Congratulations!

chiefbigb 10-15-2023 05:45 PM

2 Attachment(s)
About ready to ride.

steve25 10-15-2023 05:58 PM

Very nice, but I would add some loops in those brake lines otherwise vibrations between the body and frame will crack them eventually.

Dragncar 10-15-2023 08:47 PM

Sweet, she went to a good home.
What intake is on that engine ?

R 70 Judge 10-15-2023 10:53 PM

Cool car!

chiefbigb 10-16-2023 08:48 AM

The intake is a modified street dominator. Has a angle cut spacer welded on top . Heat crossover cut off and a fair amount of runner work done. Came with the car as well as a rpm intake. The previous owner said the dominator would out mph the prm.by about 2 but no real et difference. I added the speed master head's and a hydrolic roller cam.

chiefbigb 11-28-2023 08:23 PM

3 Attachment(s)
Cal tracks with split mono leafs. Rear sliders and 3 inch exhaust


All times are GMT -4. The time now is 05:40 AM.