|
1965 Pontiac Tripower
1 Attachment(s)
1965 Pontiac Tripower, needs restored, carbs are correct. Asking $950 picked up in Duncan Oklahoma.
|
It appears the water crossover is drilled and tapped on the right-hand side. I have not seen that on a '65. Was that factory on some manifolds or done later?
|
should the center carb have the idle vent on the air horn?
|
4 Attachment(s)
I believe the center carburetor to be correct. The bowl casting number is 7019929 and the airhorn is identical to airhorns’ on my other 65 tripower setups. The center carb was off of an automatic car as the accelerator pump arm has the part that engages a vacuum switch. I included a better picture of the airhorn for the setup that is for sale along with pictures of my other 65 tripowers’ airhorns to compare to. As far as the hole in the water crossover, I am not sure. It is threaded so it can be plugged if not used.
|
Asking $800, would still prefer pickup but might ship. Carbs and intake would ship in separate boxes.
|
5 Attachment(s)
Quote:
It was a carry over thread hole from 1964. |
Quote:
“Just a bystander” |
2 Attachment(s)
Still have this. Pictures of the date code and part number of the center carb are attached.
|
$775 plus shipping
|
$750 plus shipping.
|
‘65 Tri-power
PM sent
|
Carbs and intake are sold.
|
| All times are GMT -4. The time now is 01:43 PM. |