Help Converting a 72 to Electric Fans and holding down the Radiator
3 Attachment(s)
I have a 72 chrome bumper LeMans (I believe the chrome bumper cars have different core supports than the enduras) that I'm putting in a Cold Case radiator and electric fans. I'm not sure how this all goes together. How does this get held down and these radiator cushions look not right as well?
https://www.summitracing.com/parts/RAD-GMA546ASK Here's what it looked like during disassembly and now in mock up. |
1 Attachment(s)
Maybe not what you wish but my 5.3 Gen V I used a thermo clutch fan. It screwed right on to the water pump.
Fan application is 1990-2011 Ranger 4.0 w/ HD cooling. What motor is this? https://forums.maxperformanceinc.com...1&d=1713069089 |
1 Attachment(s)
Quote:
|
1 Attachment(s)
@scarebird its an LQ9 w/ Holley Mid Mount FEAD
|
Look at the "restore a muscle car" brand bracket. I bought one an it was nice
|
Quote:
https://www.restoreamusclecar.com/pa...-14-sum-g3922b What I bought and am waiting on delivery of is this https://www.summitracing.com/parts/SUM-G3921B I report back how I make out. BTW - I called Cold Case today and they basically told me I need to figure it out with part available. |
Chevelle hold down was not a match. looks like im fabricating my own. Very surprised this problem isn't readily solved by now.
|
Out of curiosity - is your water pump pulley threaded at the end?
|
All times are GMT -4. The time now is 08:56 PM. |