Fuel Vapor Line Hose Clamp (Wittek-Tower, SG-18)
Has anyone found a source for the assembly line Wittek Tower Clamps
used for Fuel Vapor Return Line Hose? Stamped "SG-18" Thanks https://live.staticflickr.com/65535/...a0730eb9_b.jpg https://live.staticflickr.com/65535/...f547f3e0_b.jpg https://live.staticflickr.com/65535/...8ebe7531_o.png |
1 Attachment(s)
If anybody is still looking for these tower hose clamps, D&M Corvette in the Chicago area has some for sale. They say they got them from the closed Wittek warehouse. They are advertising them on a Facebook group.
Attachment 627646 |
I'm wrapping up a 69 RAIV. Can anyone confirm if the pump on the IV used that clamp?
|
Quote:
|
Quote:
https://www.martiauto.com/itemselect...lecteditem=yes |
I wonder if these are used on the vapor return line on a 67 HO filter or 66 tri-power filter with vapor return down by frame? My guess is not, since the filter itself uses all pinch clamps.
The 67 assembly manual shows the second design fuel pump with the vapor return using these tower clamps, but I cannot find drawings for the HO filters to verify... |
All times are GMT -4. The time now is 01:41 AM. |