PY Online Forums - Bringing the Pontiac Hobby Together

PY Online Forums - Bringing the Pontiac Hobby Together (https://forums.maxperformanceinc.com/forums/index.php)
-   67-81 Firebird & TA Parts WANTED (https://forums.maxperformanceinc.com/forums/forumdisplay.php?f=452)
-   -   need a reverse back up switch (https://forums.maxperformanceinc.com/forums/showthread.php?t=871538)

grd777 01-23-2024 07:10 PM

need a reverse back up switch
 
looking to buy a reverse back up switch for a Muncie m 20 tranny .or where can i buy one

Mr. G 01-24-2024 03:20 PM

For what car?

Formulabruce 01-25-2024 04:04 PM

Quote:

Originally Posted by grd777 (Post 6480348)
looking to buy a reverse back up switch for a Muncie m 20 tranny .or where can i buy one

Your 1972 Firebird.

This switch is on the steering column, near the base. I'm pretty sure Ames has them. This switch is actuated by the back drive linkage.

grd777 01-25-2024 04:15 PM

Quote:

Originally Posted by Formulabruce (Post 6480868)
Your 1972 Firebird.

This switch is on the steering column, near the base. I'm pretty sure Ames has them. This switch is actuated by the back drive linkage.

thanks Bruce my car was converted to a 4 speed with a m20 . is the switch the same .

not sure what you mean about the back drive linkage. do u have a photo

pontiacstogo 01-25-2024 04:22 PM

Quote:

Originally Posted by grd777 (Post 6480870)
not sure what you mean about the back drive linkage. do u have a photo

Lots of pictures in this thread;

https://forums.maxperformanceinc.com...d.php?t=870388

Often missing due to header fitment problems or not included during an auto to manual swap. It is a series of rods that operate when the shift lever is moved into reverse. Engages the reverse lights via a switch in the base of the steering column. Also works with the reverse lock out function to lock the car in reverse when the ignition is turned to the lock position.

grd777 01-25-2024 04:45 PM

Quote:

Originally Posted by pontiacstogo (Post 6480871)
Lots of pictures in this thread;

https://forums.maxperformanceinc.com...d.php?t=870388

Often missing due to header fitment problems or not included during an auto to manual swap. It is a series of rods that operate when the shift lever is moved into reverse. Engages the reverse lights via a switch in the base of the steering column. Also works with the reverse lock out function to lock the car in reverse when the ignition is turned to the lock position.


have that all in place .just want to confirm is the switch at the tranny or under the steering column

Formulabruce 01-25-2024 10:30 PM

1 Attachment(s)
Here is a pic of a Factory 1970 4 speed column. Switch is what you see on it . This comes on when car is in reverse AND Key is able to come out once engine is off. Its only a 2 pin connector. To do a conversion correctly you need a bunch of backdrive linkage And this switch and connectors for it. You can use an auto harness by just using the 2 wires for reverse that are on the combo neutral safety switch, and replace switch with smaller std switch with reverse only.
Neutral safety is accomplished by the clutch switch.
This column is Hanging upside down by the lever that moves this switch and hooks to the backdrive.
https://forums.maxperformanceinc.com...7&d=1706236221

grd777 01-25-2024 11:51 PM

Quote:

Originally Posted by Formulabruce (Post 6480978)
Here is a pic of a Factory 1970 4 speed column. Switch is what you see on it . This comes on when car is in reverse AND Key is able to come out once engine is off. Its only a 2 pin connector. To do a conversion correctly you need a bunch of backdrive linkage And this switch and connectors for it. You can use an auto harness by just using the 2 wires for reverse that are on the combo neutral safety switch, and replace switch with smaller std switch with reverse only.
Neutral safety is accomplished by the clutch switch.
This column is Hanging upside down by the lever that moves this switch and hooks to the backdrive.
https://forums.maxperformanceinc.com...7&d=1706236221

will check my car and see what i have

grd777 01-28-2024 11:47 AM

Quote:

Originally Posted by grd777 (Post 6480996)
will check my car and see what i have

yes i have this same switch ,but can not seem to see any wire for this .how does it look like

bhill86 01-28-2024 12:42 PM

Not sure about earlier years but pink and green in later.

grd777 01-28-2024 08:30 PM

Quote:

Originally Posted by bhill86 (Post 6481544)
Not sure about earlier years but pink and green in later.

i think i found it ,but mine is orange and pink

bhill86 01-28-2024 08:54 PM

Double check it. I just found my 72 diagram and it shows pink/blk and lt green.

grd777 01-29-2024 05:31 PM

Quote:

Originally Posted by bhill86 (Post 6481691)
Double check it. I just found my 72 diagram and it shows pink/blk and lt green.

i checked again i see orange and pink will take a photo and post


All times are GMT -4. The time now is 09:24 PM.